Latest News & Features – Page 112
-
ArticleAngle heads for machining centres
Designed for heavy milling, deep drilling and tapping operations, Heimatec says its new line of angle heads feature twin or double twin sets of matched angular contact bearings plus a rear radial support bearing, to offer maximum stability in use.The company says all the gears on these angle heads have ...
-
ArticlePSA enters JV with SC Uzavtosanoat
Uzbekistan – The new partnership, known as Uzbekistan PCA, will construct a plant in the Free Industrial Zone of Jizzakh to make light commercial vehicles (LCV) for the Peugeot and Citroen brands. The production capacity will be 16,000 vehicles per year, for distribution in Uzbekistan and abroad from 2019.“This LCV ...
-
Article
Lectra supplies laser airbag cutters to ZF
Germany – The company has delivered two FocusQuantum FT6K machines for multi-ply fabric, helping ZF TRW, the Active and Passive Safety Division, to increase its capacity. The components manufacturer has just established a new cutting room.“By evaluating the solution in accordance with established practices, we were able to confirm that ...
-
ArticleFord Cologne updates large-panel press
Germany – The OEM contracted Schuler to install a tri-axis transfer with overhauling carriages plus a blank loader with a line scanner. The work was completed after seven weeks and in the first six months of production the modernised press turned out 1.2m parts.In the original set up, the transfer ...
-
Article
New shot blast turbines
A new generation of blast turbines specifically designed for shot blasting aluminum components has been developed by Walther Trowal. Because of its lower density the impact energy of aluminum media on the work pieces is considerably lower compared to other blast media.To offset this limitation the company developed turbines with ...
-
ArticleCorrosion resistance process
Federal-Mogul Powertrain claims it has developed a new process for ranking the corrosion resistance of cylinder liner materials that will enable it to supply more durable components for challenging applications. By enabling direct comparison of different materials and coating processes, the new test methodology allows material development to be specifically ...
-
ArticleRideable materials lift
Wildeck has introduced a new hydraulically-operated rideable material lift (RML) that it says allows authorised personnel to safely travel with their material between levels. Standard car size is 6.0ft. x 6.0ft. x 80 inches H, and lifting capacity is 2,500 lbs., including rider. Standard top lifting height is 14ft. (GND ...
-
ArticleSafety lock for moveable machinery guards
Equipped with two Output Safety Switching Devices (OSSDs), SICK says its TR10 Lock is a type 4 device (EN ISO 14119) and offers a choice of universally-coded or unique-coded variants. The unique-coded variant accepts only previously taught-in actuators, which means it has a high coding level and therefore removes the ...
-
ArticleVR digital design solutions tool
Destaco says its Accelerate Vision Virtual Reality (VR) digital design solutions tool has been designed to work in the production of its Accelerate Collection end effector components, which can be assembled into custom solutions for most pressroom stamping applications.By using this digital design tool at the beginning of the design ...
-
ArticleThe latest wear plate
Hardox 500 Tuf is tough enough to perform as a structural material in heavy-duty dump bodies, containers and buckets, claims SSAB. The company says WearCalc and TippCalc calculations based on sliding wear with granite indicate that this material has 85-100% longer service life compared to Hardox 400.SSAB says it has ...
-
ArticleNew hot-rolled steel for chassis applications
Tata Steel says the mix of strength and formability of its XPF800 hot-rolled steel enables light weighting of complex vehicle components, while achieving the same fatigue performance as standard equivalent complex phase steels and high-strength low-alloy steels (HSLA). From a vehicle weight perspective Tata claims the XPF range can create ...
-
ArticleElectronic fuel tank venting system
A new electronically controlled fuel tank vapour venting system – eVaptive – has been developed by Eaton. The company claims this can be optimised for any vehicle platform, eliminating the need for car manufacturers to design unique venting systems for different vehicles.The actuator system is controlled by a computer algorithm ...
-
ArticleVW releases sustainability report 2016
Germany – The OEM says its ‘Together – Strategy 2025’ is intended as the foundation for “becoming one of the world’s leading providers of sustainable mobility”. The report looks at progress already made in sustainability as well as setting targets for the future.Matthias Müller, chairman of the board of management, ...
-
ArticleElringklinger starts JLR parts production
UK – Under the terms of a £12m ($15.5m) contract, the company will make 36 types of heat-shield and gasket components at its base in Redcar, North Yorkshire, for use in engine bays and vehicle assemblies across six engine variants. JLR’s demands for parts have increased after the opening in ...
-
ArticleSchuler presses head for North America
US/Mexico – The company will deliver 15 machines featuring automation and pressing forces ranging from 400 to 2,000 tons to a US automotive supplier with factories on both sides of the border. The deal includes transfer, ProgDie and stamping presses.“This is an important order for our team in Weingarten and ...
-
ArticleOpen-door opportunity
Much R&D work has been done to reduce the weight of vehicle structures, but closures still represent a significant opportunity for weight savingsClosures are mounted after body assembly and can be built up off-line, meaning that they can be made of entirely different materials, such as aluminium, to the vehicle’s ...
-
ArticleGrowth and innovation
Reduced costs, recyclability and new joining technologies are driving the use of aluminium in automotive structuresFord's switch from steel to aluminium for the body of its F-Series trucks was called its ‘billion-dollar gamble’. But the carmaker felt that the opportunity to shed some 300kg of weight from the vehicle was ...
-
ArticleTracey takes Alfa Romeo and Jeep role
UK – With immediate effect, Andrew Tracey will step into the role of brand country manager for the two marques, replacing Damien Dally. The latter has moved to a new role with the parent company, Fiat Chrysler Automobiles, in Turin, Italy.Tracey has 15 years of experience in the automotive industry, ...
-
ArticleBeaming with benefits
Clean, flexible and able to provide quality assurance data, laser technology is now proving effective in welding plasticsA recent report released by Credence Research suggests that the US welding equipment industry for plastics is undergoing a period of explosive growth. The industry was valued at $595.3m in 2015, and the ...
-
ArticleRed-hot robots
AMS takes a look at the latest installations and innovations in the world of robot arms and automation used for welding applicationsAccording to the International Federation of Robotics, 50% of the world’s robots are used for welding. Moreover, a recent report from BCC Research reveals that the global automated/robotic welding ...