All Webinar articles – Page 3

  • Faro webinar image
    Webinar

    How 3D metrology and imaging solutions enable high levels of manufacturing performance throughout the automotive production phase

    Join the AMS / FARO Webinar to learn how OEMs and their Partners can leverage FARO 3D data capture technology to boost their productivity and efficiency across the whole automotive manufacturing lifecycle. In this webinar we will focus on , automated in-line inspection, virtual assembly and assembly ...

  • EC_Body_in_white_lower_v02
    Webinar

    How to optimise material utilisation of AHSS in electric vehicles

    As the automotive future brings an increase in electric vehicles, grades of advanced high-strength steel (AHSS) will still have an important role to play. In this webinar, SSAB’s Robert Ström will present the findings of his research into the design of cold forming steel with very high ...

  • Laser Radar inline automotive inspection
    Webinar

    Estimating the true cost of metrology in automotive BIW laser radar as part of quality 4.0

    2019-05-24T15:38:00Z

    Quality 4.0 is a new vision for quality following the lead of the Industry 4.0 concept. Automotive production relies on quality to upkeep an automaker’s brand image within its customer base. In the production process, suboptimal dimensional quality can lengthen lead times and cause cost overruns related ...

  • 1_SUV_ELECTRIC_VUE__3-4AVANT_Pour_Fond_Blanc
    Webinar

    ArcelorMittal webinar: e-mobility needs smart steel solutions

    2019-05-23T09:23:00Z

    S-in motion® customisable steel solutions for BEV enable carmakers to extend range, reduce cost, and enhance safety at the most affordable cost For the transition to electric vehicles to be fully successful, carmakers must increase efforts to extend range, reduce cost, and enhance safety. In this webinar, ...

  • 131025_HE_079small
    Webinar

    Advanced Forming technology for AHSS material. Tubular Hydroforming

    2019-05-15T16:41:00Z

    Do you want to know how to get the most out of tubes made in advanced high-strength steel? Join Peter Alm from SSAB when he shares his knowledge on this subject. With long experience in tooling and simulation, Peter will share his ideas with you over this ...

  • GOM_ATOS-5x_SB-8360_BIW-inspection_out-of-SB_operator
    Webinar

    Optical 3D metrology in the automotive body shop

    2018-12-18T13:01:00Z

    The most efficient way to identify, analyse and fix production processes as well as quality problems is using a 3D model as a digital twin of the real part in production. This is only possible when covering the complete part surface. So, in order to meet these requirements for ...

  • S-in motion Rear chassis
    Webinar

    ArcelorMittal S-in motion® Chassis solutions

    2018-11-08T12:32:00Z

    The webinar will explore some examples of best-in-class steel grades for chassis applications and cover ArcelorMittal’s S-in motion® Chassis study which identifies potential savings in mass of up to 20%. As part of the study, specific assessments have been conducted on formability, weldability, and fatigue. The study ...

  • Docol Stillbild 1 (2)
    Webinar

    How can 3rd generation steel be a problem solver?

    2018-11-02T12:30:00Z

    SSAB recently launched its metal-coated Docol 600DH and Docol 800DH steel for trials. These are 3rd generation steels that provide improved formability and good weldability. This webinar discusses the 3rd generation steel product development at SSAB and ask what solutions these materials can deliver in high volume ...

  • Live Colour Scan_PR
    Webinar

    How 3D data is driving new levels of automotive productivity and efficiency

    2018-10-31T10:04:00Z

    In this webinar, we’ll discuss how world’s leading OEMs are leveraging FARO 3D data capture technology to boost productivity and efficiency across the whole supply chain and automotive manufacturing lifecycle. The presentation will set out the key benefits of using this 3D data, from prototyping and industrial styling to ...

  • Body_in_white_Topview_with_blue_pipes_v05
    Webinar

    Lower weight and higher strength in tubular vehicle structures

    2018-08-29T11:58:00Z

    This webinar provides an overview for automotive manufacturers looking to make effective use of high strength tubular structures in modern vehicle design. The presentation examines the possibilities offered by these materials as a high strength and low weight alternative in various structural applications. About the ...

  • Docol-Elbil-2018_Utkast
    Webinar

    How to make safe electric vehicles in a smart and cost effective way

    2018-06-18T12:53:00Z

    In a future with more electric vehicles, the advanced high-strength steel (AHSS) will have an important role to play. In this webinar Jonas Adolfsson, car body design expert at SSAB, talks about how advanced high strength steels can help make electric vehicles safer and lighter at an ...

  • LR_on Robot
    Webinar

    Increasing process quality and repeatability with Laser Radar CMM

    2018-06-04T14:49:00Z

    High-end manufacturing requires reliable quality information fed back into the production process. The availability of this information during prototyping, ramp-up and the main build process is key to reducing time-to-production and increasing process quality and repeatability. The Nikon Metrology Laser Radar CMM solution encapsulates these requirements to ...

  • ScanArm_2
    Webinar

    Metrology Solutions to Streamline Quality Control, Inspection and Assembly Processes

    2018-04-25T13:10:00Z

    This webinar will discuss a broad portfolio of metrology solutions that can address an array of automotive manufacturing challenges. The presentation describes some of the FARO metrology solutions that have been already chosen by leading automotive companies to streamline functions such as quality control, inspection and assembly processes. ...

  • SeatAnimated1
    Webinar

    How to make front seats 20% lighter with advanced high strength steels

    2018-04-17T14:50:00Z

    In this webinar you will discover how advanced high strength steels (AHSS) can be used to achieve significant weight reduction for vehicle front seats. Our newly ArcelorMittal S-in motion study shows that the weight of front seats can be cut by almost 20 percent while maintaining ...

  • 1_Gear_welding
    Webinar

    Fibre laser solutions for challenging applications in the automotive industry

    2017-11-23T10:18:00Z

    High brightness fibre lasers are enabling improved performance in many applications in automotive industry – even the more challenging, such as welding of zinc-coated steel. In this webinar, we discuss how to select the most suitable laser technology for specific automotive applications, taking into account the latest developments and ...

  • Technical_Shot_BIW_HotForming_V2_Usibor2000-Ductibor1000
    Webinar

    Lightweighting with laser welded blanks and the latest generation of steel grades

    2017-11-16T14:14:00Z

    In this webinar, we illustrate the benefits of combining laser welded blank technology and solutions with the latest advanced high strength steel grades, including the new generation of press hardenable steels – Usibor® 2000 and Ductibor® 1000. This webinar was recorded on ...

  • app13-landscape.jpg
    Webinar

    New mobile inspection solutions for streamlining automotive manufacturing processes

    2017-10-26T14:19:00Z

    Smarter and easier inspection solutions can avoid expensive rework after final assembly of parts and components. During the Webinar you will learn how the FARO Visual InspectTM product suite enables large, complex 3D CAD data to be transferred to an iPad and then used for mobile visualization and comparison ...

  • Replenishment
    Webinar

    Smart Material Flow for Manufacturing

    2017-10-03T11:01:00Z

    Omni-ID is a leading innovator in bringing IoT technology to factory floor material workflows. Their intelligent visual tags (RFID tags with sensors and e-Paper displays) and ProVIEW software system enable the material itself to become smart (location and operation aware), communicating directly with both operators and machines throughout the ...

  • SSAB_Docol_TMS_V_72dpi
    Webinar

    High-strength steel for chassis applications - learn about its mechanical properties and behaviour

    2017-09-27T09:42:00Z

    Across various chassis and suspension applications, several grades of steel are available.This webinar defines the differences between them, focusing on the mechanical properties that directly affect application behaviour to identify the right material for the right application. The presentation also features information on improvement of edge ductility, such as pre-piercing, ...

  • Tapping
    Webinar

    Simulating Non-Ferrous Cut and Roll Tapping in the Lab

    2017-09-18T13:48:00Z

    As aluminum alloys expand in breath of application and metallurgical properties, it is important to continuously advance the fluids used to machine them. Reducing the total cost of ownership for metalworking fluids is a primary goal of every fluid manufacturer, and often this can be achieved through leaner, tighter ...