Latest News & Features – Page 73
-
ArticleAutomotive BIW clamping solutions
Destaco claims that when its latest VV85G Series precision guides are used in conjunction with its power clamp, pin clamp and pin packages, they offer users increased operational reliability in applications such as sheet-metal welding for automotive body-in-white.These guide units have the same mounting-hole pattern as the company’s power-clamp products ...
-
ArticleVision-guided part localisation systems
The PLOC2D and PLB 520 are 2D and 3D vision-guided part localisation systems from SICK. The company says these are designed for the set-up of robot picking from a belt, bin or stillage, and are suitable for both cobots and conventional industrial robots.The PLOC2D vision system provides 2D localisation of ...
-
ArticleRemote monitor for automatic lubrication systems
SKF says its LRM2 lubrication remote monitor is compatible with oil or grease and designed for use with lubrication systems that cannot undergo daily checks due to the nature or position of the application. The company says this system can be used on single-line, dual-line and progressive lubrication systems and ...
-
ArticleAdjustable side milling cutter
The milling body on its new side milling cutter features a central sleeve that enables the required groove width to be adjusted on a pre-setter, says Paul Horn.The company says it offers two body types, the first having a cutting edge diameter of 100mm is equipped with 14 type 406 ...
-
ArticleRobot guidance system
Perceptron says its AutoGuideMT product for machine tending robotic guidance applications was created with plant floor requirements and operators in mind. It’s claimed the system’s built-in tools will auto calibrate to the part CAD without the need for laser trackers or special targets, and requires only one sensor acquisition to ...
-
ArticleMagna to make new Toyota Supra
Austria - Magna has announced that it will build the new Toyota Supra at its facility in Graz, Austria. The car was first revealed at the 2019 North American International Auto Show (NAIAS), and is expected to enter production in early 2019.As well as assembling the Supra, Magna will also ...
-
ArticleVolkswagen selects EV production base
US - Volkswagen has announced that it will use its plant in Chattanooga, Tennessee as a base for electric vehicle manufacturing in North America. It currently makes the Atlas SUV and Passat sedan at the factory. “The US is one of the most important locations for us and producing electric ...
-
ArticleWire EDM machine
Featuring a bigger 800mm table, the new α-C800iB CNC wire EDM machine is the largest machine in its ROBOCUT portfolio, says Fanuc. This variant uses Ø0.1-0.3mm wire to process thick, stepped and tapered workpieces up to 300mm in thickness and 3000kg in weight. It also features an increased XY-axis stroke ...
-
ArticlePhotochemical etching for metal parts
The use of photo etching offer OEMs the ability to produce aesthetic complex mesh patterns and high definition surface engraving, claims Precision Micro. The company explains that this process doesn’t require hard steel tooling, instead, it uses digital tooling that it’s claimed offers interior trim designers greater freedom to experiment ...
-
ArticlePeugeot 2008 hits production milestone
France - The one-millionth Peugeot 2008 rolled off production lines at the company's Mulhouse plant in eastern France. Launched back in 2013, the SUV is now one of the most popular vehicles in Peugeot's portfolio.The Mulhouse plant was the first to start making the 2008. Around 780 units of the ...
-
Article
More on Audi
A high-performance build The Audi R8 series of sports cars is described as being closer to motor racing than any other on-the-road vehicles. Mike Farish takes a closer look at the manufacturing operationThree Audi models enter production Algeria – Assembly of the Audi A3 Sportback, A3 Sedan and Q2 has ...
-
ArticlePressed, radial ISO indexable inserts
Mapal says it now offers a milling programme with pressed, radial ISO indexable inserts. The new face, shoulder, slot and shell end face milling cutters are designed for roughing and for medium machining of cast iron, steel and stainless steel, says the company. It’s claimed the tool bodies are designed ...
-
ArticleConducting smart energy
Energy management has been an important aspect of vehicle production for decades, but innovative new solutions that can be linked are proving extremely effective Road transport is estimated to account for around 17% of global greenhouse gas (GHG) emissions. Figures from the European Commission suggest that passenger car and heavy-duty ...
-
ArticleDashboard meeting
Switching from gantry line to a fleet of AGVs, an IAC facility near Liverpool has brought swift and smart adaptability to its instrument panel assembly process Specialists in interior components, IAC operates in all automotive manufacturing markets around the globe. But it was its production lines at Halewood ...
-
ArticleVW appoints new CV board member
Germany - Volkswagen has appointed Alexander Hitzinger as the new member of the board of management for technical development at Volkswagen Commercial Vehicles. He will take charge of establishing and managing VW's Centre for autonomous driving and Mobility-as-a-Service (MaaS)."In Alexander Hitzinger we have recruited a renowned expert as Member of ...
-
ArticlePaintshop 4.0
Nick Holt visits Eisenmann’s technology centre in Holzgerlingen, near Stuttgart, for a preview of the latest skidless paintshop technology prior to its installation at the Daimler plant at Kecskemét The skids used to convey vehicle bodies through the various coating and drying stages in the paintshop are seen as a ...
-
ArticleTesla starts building China factory
Tesla unveiled plans to build a factory in China back in 2014. The EV maker has now taken its first step to construct the facility after breaking ground on the site in Shanghai. The move comes amidst a series of regulatory changes made by government which could have a significant ...
-
ArticleAWD coupling with vehicle dynamics software
BorgWarner claims it has tailored its latest electro-hydraulically actuated all-wheel drive AWD coupling technology to deliver a dynamic driving experience. The company says this unit is equipped with an integrated electronic control unit (ECU) featuring adaptable vehicle dynamics software. The electronically controlled multi-plate clutch uses data such as vehicle velocity ...
-
ArticlePress lines for EV components
Schuler says it now offers systems for the economic serial production of components for E-cars – including body and structural parts, metal housings for batteries or electric motor laminations for engines.The company says it has developed a high-speed press to produce thinner laminations for the increasingly complex geometry of electric ...
-
ArticleCasting a duo
Two innovative metal forming techniques could have a significant impact on the press shop of the future