Ford – Page 19
-
Article
New ultrasonic controller for level measurement
The new Sitrans LUT400 series ultrasonic controllers offer one-millimetre (0.04-inch) measuring accuracy, claims Siemens Industry Automation Division. These compact, single point ultrasonic controllers are designed to continuously monitor and control level in liquids, solids, or slurry applications for a range of industries. The controllers are available in three models: the ...
-
Article
New metrology CT system
Nikon Metrology has developed a new “absolute accuracy” Metrology CT system. The company says the MCT225 provides Metrology CT for a wide range of sample sizes and material densities with 9+ L/50μm accuracy in accordance with the VDI/VDE 2630 guideline. All internal and external geometry is measured in a single ...
-
Article
Contact scanning and optical measuring combined in coordinate measuring machine
The O-INSPECT 322 coordinate measuring machine is the smallest system in the expanding the range of applications from Carl Zeiss. The company says the system combines contact ZEISS scanning and optical measuring, and is available in two sizes: O-INSPECT 322 and the original O-INSPECT 442. Both machines use the same ...
-
Article
Multi-turn encoders use magnetic sampling for reliability
Pepperl+Fuchs has mounted its latest CVM42H absolute encoders in a stainless steel housing, flange and shaft, which the company says makes them suitable for use in harsh environments. The encoders utilize magnetic sampling to deliver 24 bit resolution position value through the CANopen protocol, and are available with an IP66, ...
-
Article
Welded studs measuring system
Aicon’s engineers have developed the DPA welded studs measuring system (for determining the position of welded studs at the body framework in relation to the CAD reference data) especially for application in the automobile industry. The company claims the new self-centering adapters allow the desired CAD zero position to be ...
-
Article
New European standard for stainless steel hollow bar
A new European standard EN 10294-2: 2012 – Hollow bars for machining, sets out the technical delivery conditions of stainless steels and nickel alloys with specifi ed machinability properties and has now been approved and released. Sandvik says its Sanmac hollow bar range of stainless steel grades has been extensively ...
-
Article
Fully automatic inline-CT for serial inspection
MatriX Technologies has extended its AXI product portfolio with an inline-CT solution for fully automatic serial inspection with computed tomography. The company says to ensure the optimum confi guration for the given inspection task, the new CT inspection system XCT-2000i can be equipped with different x-ray tubes and state-of-the-art detectors. ...
-
Article
New premium Hot Bar monitoring system
Miyachi Europe has announced the availability of its new premium Hot Bar monitoring system, designed for Hot Bar refl ow soldering, heat-seal bonding, ACFbonding and heat staking applications. The company says the new system measures force, temperature, time and displacement, allowing continuous control throughout the entire process cycle. It is ...
-
Article
Fully-assembled linear guide rail system
Igus UK claims its fully-assembled linear slide rail and carriage drylin W provides low wear, a low coeffi cient of friction and quiet, maintenance-free operation.This modular linear guide system offers both double and single rail options and can be fi tted with a range of components that includes 12 types ...
-
Article
Laser tracker with high-speed real time output
With the latest firmware update, Hexagon Metrology claims to have improved the Leica Absolute Tracker AT401’s usability. The company says the updated AT401 can perform measurements without a warm-up period. This allows the operator to switch the system on directly out of the box and start measuring immediately.The built-in WiFi ...
-
Article
Autofocus upgrade for barcode readers
Cognex has announced the addition of liquid lens optics for the DataMan 300 series of fi xed-mount barcode readers. The company says this new accessory allows any DataMan 300 reader to be upgraded from fi xed focus to autofocus. Liquid lens variable autofocus technology is suitable for applications that require ...
-
Article
Next generation sensor-less and sensor based BLDC motor control
Melexis has launched its next generation IC family for sensor-less and sensor based BLDC motor control in automotive applications. The family consists of four base members; the MLX81205, MLX81207, MLX81210 and MLX81215. The company says each is available with a variety of memory confi gurations and in different package ...
-
Article
Low cost galvo-based scanning system
Traditionally, the galvo system of laser marking has cost considerably more than alternative methods, but Electrox says it has developed its Raptor laser to bridge this gap. The company claims the Raptor can permanently mark 1,000 characters per second with an accuracy of fi ve microns. This is supported by ...
-
Article
New levels of accuracy for distance positioning sensor
With the next-generation DL100Hi laser distance measurement sensor, Sick UK says it has developed a signifi cantly-improved control loop technology to achieve faster and more accurate position feedback. The sensors’ data output supports applications with acceleration values up to 15m/s2. The DL100Hi offers the choice of three measuring ranges to ...
-
Article
High-speed drill for steel and cast iron machining
The new MEGA-Speed-Drill from Mapal has been designed specifi cally for effi cient and cost-effective machining of steel and cast iron. Suitable for wet and dry machining the new cutting edge geometry features an unequal cutting pitch and three guide chamfers, which, the company claims, virtually eliminates vibration during machining ...
-
Article
Latest VF camera platform for hightech industries
Framos’ new Visiosens VF camera series is a fl exible and customisable image capture platform with more than 140 camera variants per image sensor. The company says new features include the Mini-B USB2.0 and the latest Micro USB3.0 super-speed interface with up to 5Gbps as well as the latest Sony ...
-
Article
Introducing new 30-90 kW oil-injected screw compressor range
Atlas Copco Compressors claims its new 30-90 kW oil-injected screw compressor range offers signifi cant improvements in sustainability and reliability, as well as performance increases of up to 10%. The new GA 30+ to 90 range is available in three variants: the GA 37-90 VSD models; the premium effi ciency, ...
-
Article
Efficiency savings with New ARPRO grade
JSP has introduced a new grade of ARPRO – the specialist lightweight material – which the company claims will faciltitate savings in inventory management, as well as logistical effi ciency. ARPRO® 1000 – 5253 is a grade that customers can expand on site to a wide range of densities in ...
-
Article
Compact spot-welding solution
A new system from Comau integrates a welding gun with the fl ange connected directly to the robot without the need for any adapter kit. It features a compact welding gun, equipped with an improved transformer, which is rotated 90° to further decrease the dimensions of the body and shift ...
-
Article
Environmentally friendly e-coat corrosion protection
CathoGuard 800 is BASF´s latest e-coat technology for OEMs. The company claims that the technology contains less than one percent solvents, is tin-free and as such, already complies with future European environmental legislation. General Motors (GM) has moved to this cathodic e-coat at its plants worldwide since 2009. SGM Yantai ...