Editor's Pick – Page 102
-
ArticleThe perfect weld
Fronius sheds light on how data documentation can improve industrial welding processes in automotive productionIn the increasingly digitalised and interconnected automotive OEM and supplier industries, one factor that is playing a growing role is the efficient acquisition and processing of the data generated in production. This enables manufacturers to optimise ...
-
ArticleNew 5-axis horizontal machining centre
The HF 3500 is a new model to Heller’s 5-axis, horizontal-spindle machining centre range. The company says this machine is intended for 5-sided or simultaneous 5-axis dynamic machining of medium to large batches of complex prismatic parts, ranging from small workpieces to heavier components up to the 550kg maximum table ...
-
ArticlePersonal protection equipment
DuPont says it now offers Tychem garments, including gloves, to help provide workers with the protection required in hazardous environments. To enable users to select the correct garments and gloves appropriate to chemical exposure hazards the company now has its SafeSPEC personal protective equipment (PPE) selector tool. The Tychem gloves ...
-
ArticleHigh-strength tool steel
Deutsche Edelstahlwerke (DEW) says it has developed the hot work tool steel Thermodur 2383 Supercool for press hardening applications such as those used in the automotive industry.The company claims this tool steel in quenched and tempered condition, offers a higher thermal conductivity of 44 W/(mK) at 100°C. As such a ...
-
ArticleSkoda makes 250,000th Kodiaq
Czech Republic - The OEM has hit the milestone after delivering over 100,000 units of the Kodiaq SUV to customers between January and August 2018."Given that we only presented the Skoda Kodiaq two years ago, reaching a figure of 250,000 vehicles produced is an enormous achievement," stated Michael Oeljeklaus, Skoda's ...
-
ArticleDaimler hits milestone in India
India - Daimler India Commercial Vehicles (DICV), which is part of Mitsubishi Fuso Truck and Bus Corporation (MFTBC), has made 100,000 vehicles at its plant in Oragadam - an industrial town located near Chennai on the south east coast. The news comes just two years after the facility hit the ...
-
ArticleCompact compressor range
Its new oil-lubricated, rotary screw compressors, part of the CompAir L-Series range, are available as 30, 37 and 45kW models, says Gardner Denver and are offered with both fixed and regulated speeds. These units are said to be capable of delivering compressed air in pressure ranges from 5 to 13 ...
-
ArticleFibre laser cutting machine for large sheet material
Bystronic says its new BySprint Fibre 12020 laser cutting system is capable of processing sheet up to 12 metres long by two metres wide. The company says this machine is able to cut both large and small components, the smaller sheets processed by positioning them next to each other on ...
-
Article3D focus-variation measuring instrument
Said to be suited to production measurement, the µCMM 3D focus-variation system offers users the advantages of tactile coordinate measuring technology with optical surface measurement to measure dimensions, position, shape and surface finish of components with the one optical sensor, claims Alicona.The company says it provides the ability to measure ...
-
ArticleImproving plant safety with smart plastics
igus says it has been developing its family of smart plastics with improved ‘isense’ sensors and monitoring modules that add intelligence to energy chains, cables, linear guides and slewing ring bearings. The company claims these will measure wear status and alert the user early enough to plan repair or replacement.The ...
-
ArticleNew door latch design to improve quality and cabin
Magna claims to have recently developed the Comfort+ door latch to improve both the feel of a car’s door when opening and closing, and the quietness of the cabin.The company says this design turns sliding friction into rolling friction within the mechanics of the door latch, which reduces the efforts ...
-
ArticleNew sensors for touch and automate system
Isra Vision says that its MONO2½D- an MONO3D ‘Touch & Automate‘ sensors will now be equipped with embedded technology to speed up scanning times. The company says it is preparing a generation of connective sensors that can be navigated with smartphones or tablets and offer easy usability.It’s claimed these sensors ...
-
ArticleSlim nozzle torch body
Its new torch body for robotic welding devices features the MTB 350’s gas nozzle, which has a diameter that is 20% smaller than conventional torches, claims Fronius. The 20mm nozzle allows the welding torch to reach the interface more easily when working with challenging component geometries, and offers a high ...
-
ArticleFord's future
The UK press was rather excited recently when one of the Sunday papers claimed that the Ford Mondeo would be axed. Given that this model is not, and has never been, made in the UK, such concern was perhaps surprising. This was part of a wide-ranging story that Ford was ...
-
ArticleSkoda announces head of 'India 2.0'
India - Pavel Richter has been named production technical director of the Skoda-led 'India 2.0' project - an initiative launched by the Volkswagen Group back in July 2018 with the primary goal of developing and producing models specifically for the Indian market. Richter will be responsible for production of all ...
-
ArticleA European focus
The third edition of the French automotive forum offered insights into the region’s production footprint and OEM e-mobility strategies. Nick Holt reports The 3rd FEAL Auto forum placed its focus on the Hauts-de-France, seen as a primary region for automotive manufacturing. The event highlighted the strong commitment from both regional ...
-
ArticleFact, not fiction
Mike Farish reports on a sci-fi inspired additive technique that’s gaining interest with automotive manufacturers New items of technology often get hyped as being like something from science fiction, but in the case of one of the most innovative and unusual additive techniques now on the market, continuous liquid interface ...
-
ArticleMaking metal add up
Additively manufactured metal parts present a challenge for high-volume production but at the other end of the scale, engineers are successfully developing the process for specialist, low volume parts. Mike Farish reportsAll over the automotive industry companies are exploring the potential of additive techniques to make parts in polymers and ...
-
ArticleAudi Hungaria starts making Q3
Hungary - The OEM has started making the second generation of its compact SUV at its plant in Győr, which is situated in the north west. The Q3 is now the fifth model being produced at the facility, sharing production lines with the A3 Sedan and Cabriolet, as well as ...
-
ArticleWaste not…
Karen McCandless reports on vehicle-maker recycling projects ranging from plastic bottles to electric vehicle batteries As vehicle production numbers continue to increase, up from 11.9m in 2013 to 17m in 2017, so do the automotive industry’s waste management efforts continue to improve. The waste generated per unit produced in the ...
